How To Install Ceramic Tile
For anyone who'd like to enjoy a nice kitchen and a great bathroom, ceramic tiles often make the perfect choice; and if you also want to save money then, a simple “do-it-yourself” option is the most cost effective. If you already know how to install ceramic tile, then, you'll have to start by preparing your home for the tiling process as such. The selection opportunities are manifold and the tile designs options are considered virtually unlimited. A correct planning and analysis of the procedure is highly advisable since you thus avoid paying lots of money and wasting too much time.
What are the existing features of your kitchen for instance? What color are the walls, the furniture and what kind of lighting system do you actually use? Each and every one of these elements can influence the choice of the tiles, not to mention about the “how to install ceramic tile” specificity. Color tones should be matched with certain corners or areas. Only after you have dealt with all these details, it is time for you to go shopping. Take some samples of your kitchen paint color to make sure that you truly make the right choice. Both tiles and supplies are equally important, but don't neglect the tools either.
When you are learning how to install ceramic tile, there are some pre-installation requirements to be considered. You will need spacers, grout, a sponge, a bucket as well as a wet saw and tile nippers. Prepare the surface first by repairing and patching any damages in it; holes, cracks and bumps must be leveled so that you begin tiling on a dry and smooth area. There are no special rules related to the kind of surface on which you want to work as long as it meets the above mentioned conditions.
The next work phase when it comes to learning how to install ceramic tile refers to the cutting and laying techniques. All the tiles have to be measured carefully and cut either straight or diagonally; you will need a tile cutter, especially if you need to create curved cuts as well. For the later situation only small surfaces should be cut at once in a process that rather resembles to chipping than to cutting. The resulting sharp edges can be dealt with by means of a special carborundum stone. The videos that teach you how to install ceramic tile are very explicit when it comes to dealing with corners and rounded areas.