How To Make A BB Gun

Following are few tips using which one can make a BB gun using a Mechanical pencil. This is a miniature BB guns and a real fun while using it.

Making a BB gun with a mechanical pencil

Steps 1. Consider this list of the things that you will need before following these steps and making a gun: * Pliers, Scissors or knife * 6mm metal or plastic bbs * mechanical pencil * small rubber band * larder pen 2. Get a wire cutter and a mechanical pencil. Make sure that there is no lead present in the pencil. 3. Use a pocket knife to cut the end of the pencil. Pull out the eraser holder to remove the top and the inside of the pencil. 4. Take a larger pen and hollow it out. Place the inside of the mechanical pencil in the hollow pen. A slightly larger pen is required to fire out the bb's 5. Take a rubber band and stretch it out till the middle of the mechanical pencil. Attach a eraser by cutting a slit through it. In order to hold the barrel down, wrap another rubber to the first one along the barrel. 6. Put the BB in the front by pulling back the slide.

Now the BB is ready to shoot out.

Second Method

Steps 1. Cut of the lead pencil at its writing end 2. Remove the stuff inside and pull out the eraser with the help of a lead holder. Stick them together with a tape. 3. Stretch the rubber band to the pencil clip by putting it over the eraser. 4. Use clay balls to pull back and fire


1. Use small or thick rubber bands to get higher velocities 2. The cutting of the end of the pencil becomes easier by using a wire cutter 3. Experiment firing with different ammos like sticks or metal bbs 4. The wadded up piece of paper can also be used to fire as it is less lethal. 5. The tip of the balloon can also be cut and used as a rubber band.


* Use safety glasses while operating this gun * Avoid shooting living things * Do not take this bb to school as it will invite more trouble * NEVER look down into the barrel while the bb is loaded. IT can fire by losing grip. * DO not aim too low as the bb will roll out * BE Careful while using sharp objects as it can be dangerous. The electric airsoft Guns differ from other airsoft guns, because they use electrical power from an onboard battery to drive a motor that turns gears inside the gun to compress and release a piston. This piston then creates a blast of air that propels the BB. They are often called automatic electric guns or AEGS, because they are capable of a Rate of Fire (ROF) of 300 to 900 rounds per minute (RPM), and their muzzle velocities range from 200 to 400 feet per second. The creation of the automatic electric gun or AEG was the result of immense popularity gained by airsoft guns during the 1990s. In the search for a better-performing, more efficient and powerful airsoft gun, Japan developed the first Electric airsoft gun. With the passage of time, the guns began to look increasingly realistic owing to external modifications such as metal bodies and reinforced plastics, and the popularity of the AEG also increased with each improvement. The most popular electric airsoft guns are manufactured by the Tokyo Marui, a Japanese airsoft gun manufacturer. The Marui AEG has a motor that drives a series of 3 gears mounted inside a gearbox. This makes it one of the most powerful airsoft guns on the market. Modifications and replicas of this model made by other manufacturers are widely available. Tokyo Marui has also introduced the automatic electric pistol or AEP, the first electric powered handgun capable of full-automatic fire. Electric airsoft guns are the most popular and widely available airsoft guns in the international markets, greatly preferred by skirmish veterans.

Inkjet cartridges from Inkjet Direct | Toner refill | InkTec refills for Dell Lexmark HP | InkMan cartridge ink and toner refills | Scottish Borders Hotels | The Haughfoot Lodge No 1824 | Lodge 788 |